Mills
Bladed Junk Mills
These uncompromising mills are ideal for cement milling jobs, plug removal or general milling jobs. Bladed Junk Mills are dressed with high-quality tungsten carbide to ensure optimal performance in any application.
| Equipment Description | |
|---|---|
| 1.988" OD Mill | Bladed Junk Mill, w/1" AMMT Pin |
| 2.438" OD Mill | Bladed Junk Mill, w/ 1" AMMT Pin |
| 2.750" OD Mill | Bladed Junk Mill, Reverse Cutting Profile, w/ 1 1/2" AMMT Pin |
| 2.938" OD Mill | Bladed Junk Mill, w/ 1 1/2" AMMT Pin |
| 3.500" OD Mill | Bladed / Fracport Junk Mill, w/ 2 3/8" REG Pin |
| 3.875" OD Mill | Bladed Junk Mill, w/ 2 3/8" REG Pin |
| 3.875" OD Mill | Bladed Junk Mill, w/ 2 3/8" REG Pin |
| 4.500" OD Mill | Bladed Junk Mill, w/ 2 3/8" REG Pin |
| 4.625" OD Mill | Bladed Junk / Plug Mill, w/ 2 3/8" REG Pin |
| 5.500" OD Mill | Bladed Junk Mill, w/ 3 1/2" REG Pin |
| 5.875" OD Mill | Bladed Junk Mill, w/ 3 1/2" REG Pin |
| 6.125" OD Mill | Bladed Junk Mill, w/ 3 1/2" REG Pin |
| 6.151" OD Mill | Bladed Junk Mill, w/ 3 1/2" REG Pin |
Concave Mills
The concave shape is ideal for milling bit cones and other loose objects by
keeping the fish centered under mill for greater effectiveness.
| Equipment Description | |
|---|---|
| 2.450" OD Mill | Concave Bladed Junk Mill, w/ 1" AMMT Pin |
| 4.765" OD Mill | Concave Bladed Junk Mill, w/ 2 3/8" REG Pin |
| 4.875" OD Mill | Concave Mill, w/ 2 7/8" REG Pin |
| 5.750" OD Mill | Concave Mill, w/ 3 1/2" REG Pin |
| 7.000" OD Mill | Concave Bladed Junk Mill, w/ 2 7/8" REG Pin |
Flat Bottom Junk Mills
Designed for cement, general junk, tubing milling or packer removal.
| Equipment Description | |
|---|---|
| 2.450" OD Mill | Flat Bottom Bladed Junk Mill, w/ 1" AMMT Pin |
| 3.625" OD Mill | Flat Bottom Junk Mill, w/ 2 3/8" REG Pin |
| 3.650" OD Mill | Flat Bottom Junk Mill, w/ 2 3/8" REG Pin |
| 4.625" OD Mill | Flat Bottom Junk Mill / Slight Concave & Smooth OD, w/ 2 7/8 REG Pin |
| 5.500" OD Mill | Flat Bottom Junk Mill, w/ 3 1/2" REG Pin |
| 6" OD Mill | Flat Bottom Junk Mill / Slight Concave, w. 3 1/2" REG Pin |
| 6.125" OD Mill | Flat Bottom Junk Mill / Slight Concave & Smooth OD, w/ 3 1/2" REG Pin |
| 6.151" OD Mill | Flat Bottom Junk Mill / Slight Concave & Smooth OD, w/ 3 1/2" REG Pin |
| 8.250" OD Mill | Flat Bottom Junk Mill, w/ 4 1/2" REG Pin |
| 8.500" OD Mill | Flat Bottom Junk Mill w/ rough OD to suit 8-1/2" Open Hole, w/ 4 1/2" REG Pin |
| 11.875" OD Mill | Flat Bottom Junk Mill w/ rough OD to suit 12-1/4" Open Hole, w/ 6 5/8" REG Pin |
String Mills
Designed to clean out casing and whipstock windows. Their short leading and
trailing angles, allow the mill to clean “bird nest” and other obstructions in the string, while the
bottom hole tool is milling. This string mill assures that the milled section maintains full gage.
| Equipment Description | |
|---|---|
| 3.875" OD Mill | String Mill, w/ 2 3/8" REG Pin x 2 3/8" REG Box |
| 5.562" OD Mill | String Mill, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| 6.000" OD Mill | String Mill, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| 6.241" OD Mill | String Mill, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| 8.500" OD Mill | String Mill, w/ 4 1/2" IF Pin x 4 1/2" IF Box |
Tapered Mills
Designed to be used to repair collapsed casing or tubing, and to shave off
cement or corroded parts in casing. The taper mill hard facing is designed to clean the casing
without cutting it, and to penetrate very gradually.
| Equipment Description | |
|---|---|
| 1.990" OD Mill | Tapered Mill, w/ 1" AMMT Pin |
| 1.992" OD Mill | Tapered Mill, w/ 1" AMMT Pin |
| 2.347" OD Mill | Tapered Mill, w/ 1" AMMT Pin |
| 2.438" OD Mill | Tapered Mill, w/ 1" AMMT Pin |
| 2.938" OD Mill | Tapered Mill, w/ 1 1/2" AMMT Pin |
| 3.875" OD Mill | Tapered Mill, w/ 2 3/8" REG Pin |
| 4.234" OD Mill | Tapered Mill, w/ 2 3/8" Reg Pin |
| 4.750" OD Mill | Tapered Mill, w/ Fin Stabilizer & 2 3/8 REG Pin |
| 5.220" OD Mill | Tapered Mill, w/ 2 3/8" REG Pin |
| 5.875" OD Mill | Tapered Mill, w/ 3 1/2" REG Pin |
| 5.960" OD Mill | Tapered Mill, w/ 3 1/2" REG Pin |
| 6.125" OD Mill | Tapered Mill, w/ 3 1/2" IF Box (Used with Casing Section Mill) |
| 8.437" OD Mill | Tapered Mill, w/ 4-1/2" Reg Pin |
| 8.500" OD Mill | Tapered Mill, w/ 4 1/2 Reg Pin |
