Fishing Tools
Jars
| Jars |
|---|
| Hydraulic Drilling/Fishing Sup-R-Jars: 8" OD x 3" ID w/ 6 5/8" Reg Pin x 6 5/8" Reg Box |
| Hydraulic Drilling/Fishing Sup-R-Jars: 6 1/2" OD x 2 3/4" ID w/ 4" IF Pin x 4" IF Box |
| Hydraulic Drilling/Fishing Sup-R-Jars: 4 3/4" OD x 2 1/4" ID w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Hydraulic Superior Fishing Jar: 3 1/8" OD x 1" ID x 2 3/8" Reg Pin x Box |
| Hydraulic Superior Fishing Jar: 3 3/4" OD x 1 1/2" ID, w/ 2 3/8" IF Pin x 2 3/8" IF Box |
| Hydraulic Superior Fishing Jar: 4 3/4" OD x 2 1/4" ID, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Z Type Fishing Jar: 3 1/8" OD x 1" ID, w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Z Type Fishing Jar: 4 3/4" OD x 2" ID, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Z Type Fishing Jar: 6 1/2" OD x 2 1/4" ID, w/ 4 1/2" IF Pin x 4 1/2" IF Box |
| Superior Fishing Intensifier: 3 1/8" OD x 1" ID, w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Superior Fishing Intensifier: 3 3/4" OD x 1 1/2" ID, w/ 2 3/8" IF Pin x 2 3/8" IF Box |
| Superior Fishing Intensifier: 4 3/4" OD x 2 1/4" ID, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Superior Fishing Intensifier: 6 1/2" OD w/ 4-1/2" IF Pin x 4-1/2" IF Box |
| Z Type Fishing Intensifier: 3 1/8" OD x 1" ID, w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Z Type Fishing Intensifier: 4 3/4" OD x 2" ID, w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Z Type Fishing Intensifier: 6 1/2" OD x 2 1/4" ID, w/ 341/2" IF Pin x 4 1/2" IF Box |
| Lubricated Bumper Sub: 3 1/8" OD x 1" ID, w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Fishing Bumper Sub: 3 3/4" OD x 1 1/2" ID, 20" Stroke w/ 2 3/8" IF Pin x 2 3/8" IF Box |
| Fishing Bumper Sub: 3 5/32" OD x 1" ID, 20" Stroke w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Fishing Bumper Sub: 4 3/4" OD x 2 1/4" ID, 20" Stroke w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Fishing Bumper Sub: 6 1/2" OD x 2 1/4" ID, 20" Stroke w/ 4 1/2" IF Pin x 4 1/2" IF Box |
Safety
| Safety |
|---|
| Safety Joint: 3 1/8" OD x 1" ID w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| Safety Joint: 3 5/8" OD x 1 1/2" ID w/ 2 3/8" IF Pin x 2 3/8" IF Box |
| Safety Joint: 4 3/4" OD x 2 11/16" ID w/ 3 1/2" IF Pin x 3 1/2" IF Box |
| Safety Joint: 6 1/2" OD x 3 3/4" ID w/ 4 1/2" IF Pin x 4 1/2" IF Box |
| Safety Joint: 8" OD x 5" ID w/ 6 5/8" Reg Pin x 6 5/8" Reg Box |
Wash pipe
| Washpipe |
|---|
| 3-1/2" Wash Over Pipe Drive Sub, 3-1/2" TSWP Pin x 2 7/8" IF Box |
| 3-1/2" Wash Over Pipe, OD 3-1/2", ID , 3-1/2" TSWP Connections |
| 4-1/2" Wash Over Pipe Drive Sub, 4-1/2" TSWP Pin x 2 7/8" IF Box |
| 4-1/2" Wash Over Pipe Pup Joint, OD 4-1/2", ID 3.59/64, 4-1/2" TSWP Connections - 3mtrs |
| 4-1/2" Wash Over Pipe, OD 4-1/2", ID 3.59/64, 4-1/2" TSWP Connections |
| 4-1/2" Wash Over Pipe Burnshoe, 4-1/2" TSWP Connection, Dressed With Crushed Carbide |
| 5-3/4" Washover Pipe Drive Sub, 5-3/4" TSWP pin w/ entry guide x NC38 box - 4-7/8" OD tool joint |
| 5-3/4" Wash over pipe Pup Joint 3m, OD 5-25/32", ID 5-1/8",5-3/4" TSWP Connections |
| 5 3/4" Wash Over Pipe, OD5-25/32, ID 5-1/8, 5 3/4 TSWP Connections |
| 5-3/4" Wash Over Pipe Burnshoe, 5-3/4" TSWP Connection, Dressed With Crushed Carbide |
| 7 5/8" Drive Sub with 7 5/8" TSWP Pin x 4" IF (NC46) Box |
| Washover Pipe: 7 5/8" OD x 6 7/8" ID w/ 7 5/8" TSWP Pin x Box |
| 7-5/8" Wash Over Pipe Burnshoe, 7 5/8" TSWP Connection, Dressed With Crushed Carbide |
| 8 1/8" Washover Pipe Drive Sub, 8 1/8" TSWP Pin x 4 1/2" IF (NC50) Box w/ 3 1/2" REG Box triple drive bushing |
| 8 1/8" Washover Pipe, OD 8 3/32", ID 7 5/16", 8 1/8" TSWP connections |
| 8-1/8" Wash Over Pipe Burnshoe, 8-1/8" TSWP Connection, Dressed With Crushed Carbide |
| 9 5/8" Drive Sub, 9 5/8" TSWP Pin x 6 5/8" REG Box |
| 9 5/8" Washover Pipe, OD 9 5/8", ID 8 3/4", 9 5/8" TSWP connections |
| 9-5/8" Wash Over Pipe Burnshoe, 9-5/8" TSWP Connection, Dressed With Crushed Carbide |
Overshots & Grapples
| Overshots & Grapples |
|---|
| Sucker Rod Overshot Series 10 SH: 1 29/32" OD, w/ 3/4 SR Pin Up |
| Overshot Upper Extension: 1 29/32" OD x 24" Long |
| 1‐29/32" SH Series 10 Grapple Set; Grapple Basket or Spiral |
| 1‐29/32" SH Series 10 Grapple Set; Grapple Basket Control |
| 1‐29/32" SH Series 10 Grapple Set; Plain Guide for Grapple Basket |
| 1‐29/32" SH Series 10 Grapple Set; Spiral Control Guide |
| Sucker Rod Overshot Series 10 SH: 2 1/8" OD, w/ 3/4 SR Pin Up |
| Overshot Upper Extension: 2-1/8" OD x 24" Long |
| 2-1/8" SH Series 10 Grapple Set; Grapple Basket or Spiral |
| 2-1/8" SH Series 10 Grapple Set; Grapple Basket Control |
| 2-1/8"SH Series 10 Grapple Set; Plain Guide for Grapple Basket |
| 2-1/8" SH Series 10 Grapple Set; Spiral Control Guide |
| Sucker Rod Overshot Series 10 SH: 2 5/16" OD, w/ 3/4" SR Pin Up |
| Overshot Upper Extension: 2 5/16"OD x 24" Long |
| 2 5/16" SH Series 10 Grapple Set; Grapple Basket or Spiral |
| 2 5/16" SH Series 10 Grapple Set; Grapple Basket Control |
| 2 5/16" SH Series 10 Grapple Set; Plain Guide for Grapple Basket |
| 2 5/16" SH Series 10 Grapple Set; Spiral Control Guide |
| Sucker Rod Overshot Series 2 Flow release OS : 2 22/32" OD, w/ 3/4" SR Pin Up |
| Overshot Upper Extension: 2 22/32" OD x 24" Long |
| 2 22/32" Grapple Set; Grapple Basket or Spiral |
| Overshot Series 150 XSH: 3 5/8" OD, w/ 2 3/8" Reg Box |
| Overshot Upper Extension: 3 5/8" OD x 24" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 XSH: 3 7/8" OD, w/2 3/8" IF Box |
| Overshot Upper Extension: 3 7/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| Spiral grapple and type A packer for above |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150: 4 1/8" OD, w/ 2 3/8" IF Box (Takes 3 7/8" XSH Grapples & Oversized Guides) |
| Overshot Upper Extension: 4 1/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150: 4 3/8" OD, w/ 2 3/8" IF Box |
| Overshot Upper Extension: 4 3/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 SH: 4 5/8" OD, w/ 2 3/8" IF Box |
| Overshot Upper Extension: 4 5/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 FS: 4 11/16" OD, w/ 2 7/8" IF Box |
| Overshot Extension: 4 11/16" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 FS: 5 3/4" OD, w/ 3 1/2" IF Box |
| Overshot Extension: 5 3/4" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 SH: 5 7/8" OD, w/ 3 1/2" IF Box |
| Overshot Extension: 5 7/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot 150 Series: 6" OD, w/ 4" FH Box & Chevro profile 1/2" deep x 60mm pitched dressed |
| Overshot Series 70 SC: 6 1/4" OD, w/ 3 1/2" IF Box |
| Basket Grapples |
| Basket Grapple Control |
| Overshot Series 150 SH: 7 5/8" OD, w/ 4 1/2" IF Box |
| Overshot Extension: 7 5/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 SH: 8 1/8" OD, w/ 4 1/2" IF Box |
| Overshot Extension: 8 1/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150 FS: 8 1/8" OD, w/ 4 1/2" IF Box |
| Overshot Extension: 8 1/8" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 150: 8 3/8" OD, w/ 4 1/2" IF Box Overshot takes 8 1/8 SH OS accessories |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Series 70 Shortcatch: 8 1/2" OD, w/ 4 1/2" IF Box |
| Basket Grapples |
| Basket Grapple Control |
| Overshot Series 150: 11 1/4" OD,w/ 6 5/8" Reg Box |
| Overshot Extension: 11 1/4" OD x 36" Long |
| Spiral grapple and type A packer for above |
| basket grapple and mill control packer |
| basket grapple control |
| spiral grapple control |
| Overshot Guides & Stop Rings |
| Stop Ring to fit inside 5-3/4" FS Overshot w/ 2.712" ID w/ 45 Deg taper lead on bottom |
| Stop Ring to fit inside 5-3/4" FS Overshot w/ 3.125" ID w/ 45 deg taper lead on bottom |
| Oversized Cut Lipped Guide 8.250" OD to suit 5-3/4" Overshot |
| Wall Hook Guide, 5 3/4" FS Wall Hook Guide for 5 3/4" 150 FS Overshot |
| Stop ring to fit inside 5-7/8" SH overshot bowl in place of type A packer, 3-1/2” ID |
| 3.750" Oversize Guide to suit 2-22/32" Overshot |
| Oversize Guide 3-7/8" x 5-1/2" OD |
| 4-5/8" Oversize Cut Lipped Guide to suit 3-7/8" XSH Overshot |
| Oversized Cut Lipped Guide 8.250" OD to suit 5-7/8" Overshot |
| Oversized Cut Lipped Guide 11" OD to suit 8 1/8" SH Overshot |
| 16" Oversize Guide to suit 11-1/4" Overshot |
| Stop Ring to suit 8-1/8 Overshot, 7.350" OD x 4-7/8" ID x 2.385" Wide. |
| Stop Ring to suit 8-1/8" SH Overshot 9217/150-813-D w/ 2.125" ID |
| Wall Hook Guide, 8 1/8" FS Wall Hook Guide for 8 1/8" 150 SH Overshot |
Stop Subs
| Stop Subs |
|---|
| Stop Sub- 1 1/4" Reg Pin x 2 3/8" IF Box 2 7/8" to 3 1/2" Tubing - 1 1/4" Reg Pin OD 2.3" diameter x 1" long w/square shoulder |
| 2 Piece Stop Sub c/w Floating Stop Ring (3.875" OD) & Fluid Bypass Slots w/ 2 3/8" REG Pin x 2 3/8" REG Box & Internal 2 3/8" PAC Pin x Box Connections |
| Stop Sub - 2 Piece w/ 10" OD Floating Stop Ring, 4-1/2" IF Pin x 4-1/2" IF Box. (4-1/2" IF Internal connection) |
| Stop Sub - 2 Piece w/ 7-1/4" OD Floating Stop Ring, 2-3/8" IF Pin x 3-1/2" IF Box. (2-3/8" IF Internal connection) |
| Stop Sub - 2 Piece w/ 7" OD Floating Stop Ring, 3-1/2" IF Pin x 3-1/2" IF Box. (3-1/2" IF Internal Connection) |
| Stop Sub- 1 1/4" Reg Pin x 2 3/8" IF Box 2 7/8" to 3 1/2" Tubing - 1 1/4" Reg Pin OD 2.3" diameter x 1" long w/square shoulder |
| Stop Sub- 3 1/2" IF Pin x 3 1/2" IF Box, 7" Casing |
Spears
| Spears |
|---|
| Itco Releasing Spear - 1 7/8" OD, Flush Type Mandrel, w/ 1 13/16" WFJ Box |
| Itco Releasing Spear - 2 5/16" OD, Flush Type Mandrel, w/ 1 1/4" Reg Box |
| Itco Releasing Spear - 3 1/4" OD, Flush Type Mandrel, w/ 2 3/8 Reg Box |
| Itco Releasing Spear - 4 1/32" OD, Flush Type Mandrel, w/ 2 3/8" IF Box x 2 3/8" IF Pin |
| Itco Releasing Spear - 5 3/4" OD, Flush Type Mandrel, w/ 3 1/2" IF Box FOT 7" CASING |
| Itco Releasing Spear - 8 1/4" OD, Flush Type Mandrel, w/ 4 1/2" IF Box |
| Itco Releasing Spear Extension : 2 5/6" OD x 5/8" ID, 40" Long w/ 1 1/4" Reg Pin x 1 1/4" Reg Box |
| Itco Releasing Spear Extension - 1-7/8" Spear Extension |
| Spear Stop Sub - 1-1/4" Reg Pin x 2-3/8" IF Box, 2-7/8" to 3-1/2" Tubing - 1-1/4" Reg Pin OD 2.3" diameter x 1" long w/ square shoulder |
| Spear Stop Sub - 3-1/2" IF Box x 2-3/8" IF Pin, 4-3/4" OD Tool Joint x 6" OD Sqare Shoulder w/ 1-1/2" ID |
| Spear Stop Sub - 3-1/2" IF Box x 2-3/8" IF Pin, 4-7/8" OD Fish Neck x 7" OD Stop Ring w/ 1-1/12" ID |
| Spear Stop Sub - 3-1/2" IF Box x 2-3/8" IF Pin, 4-7/8" OD Fish Neck x 6.125" OD Stop Ring w/ 1-1/12" ID |
| Spear Stop Sub - 2 3/8" Reg Pin x 2 3/8" IF Box, 4 1/2" to 5" Casing |
| Spear Stop Sub - 2 3/8" Reg Pin x 2 3/8" IF Box, 5 1/2" Casing |
| Spear Pack Off Assembly - 4-1/2" - 4-3/4" CSG w/ 2-3/8" Reg Box x Pin |
| Spear Pack Off Assembly - 5-1/2" - 6-5/8" CSG w/ 2-3/8" IF Box x Pin |
| Spear Pack Off Assembly - 7" CSG w/ 3-1/2" IF Box x Pin |
| Spear Pack Off Assembly - 9-5/8" CSG w/ 4-1/2" IF Box x Pin |
| Itco Spear Grapple; 1.992 Nom Catch for 1-7/8" OD Spear |
| Itco Spear Grapple; 2.328 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 2.438 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 2.516 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 2.562 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 2.938 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 3.032 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 3.345 Nom Catch for 2-5/16" OD Spear |
| Itco Spear Grapple; 3.291 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 3.744 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 3.947 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 4.010 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 4.228 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 4.431 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 4.947 Nom Catch for 3-1/4" OD Spear |
| Itco Spear Grapple; 4.555 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 4.695 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 4.805 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.100 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.210 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.367 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.461 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.727 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.797 Nom Catch for 4-1/32" OD Spear |
| Itco Spear Grapple; 5.970 Nom Catch for 5-1/4" OD Spear (CSP7) |
| Itco Spear Grapple; 6.220 Nom Catch for 5-1/4" OD Spear (CSP7) |
| Itco Spear Grapple; 7.425 Nom Catch for 5-1/4" OD Spear (CSP7) |
| Itco Spear Grapple; 8.681 Nom Catch for 8-1/4" OD Spear |
| Itco Spear Grapple; 8.900 Nom Catch for 8-1/4" OD Spear |
Mills & Section Mills and Cutters
| Mills & Section Mills and Cutters |
|---|
| 1.992" OD Bladed Junk Mill c/w 1" AMMT Pin |
| 1.992" OD Tapered Mill c/w 1" AMMT Pin |
| 2.347" OD Mill - Tapered Mill, w/ 1" AMMT Pin |
| 2.438" OD Bladed Junk Mill c/w 1" AMMT Pin |
| 2.438" OD Mill - Tapered Mill, w/ 1" AMMT Pin |
| 2.450" OD Concave Bladed Junk Mill Dressed w/ Tungsten Carbide Inserts & Crushed Carbide w/ 1" AMMT Pin |
| 2.450" OD Flat Bottom Bladed Junk Mill Dress w/ Tungsten Carbide Inserts & Crushed Carbide w/ 1" AMMT Pin |
| 2.75" Bladed Junk Mill, 1 1/2" AMMT Pin - Reverse cutting profile |
| 2.800" OD Mill - Tapered Mill, w/ 1 1/2" AMMT Pin |
| 2.938" OD Bladed Junk Mill w/ 1-1/2" AMMT Pin |
| 2.938" OD Tapered Mill w/ 1-1/2" AMMT Pin |
| 3-1/2" OD 5 Bladed Fracport / Junk Mills w/ 2-3/8" Reg Pin - 12” gauge area |
| 3-5/8" OD Flat Bottom Mill w/ 2-3/8" REG Pin |
| 3 7/8" OD 5 Bladed Junk Mill w/ 2 3/8" REG Pin Up |
| 3-7/8" OD Integral bladed Tapered Mill w/ 2-3/8" Reg Pin |
| 3-7/8" OD intergral bladed String Mill w/ 2-3/8" Reg Pin x Box |
| 4 -1/4" OD Mill - Tapered Mill, w/ 2 3/8" Reg Pin |
| 4-1/2" OD 5 Bladed Junk Mill w/ 2 3/8" REG Pin Up |
| 4-5/8"OD Flat bottom/Slight concave mill c/w 2-7/8"REG Pin 18"Fish neck |
| 4 3/4" OD Bladed Junk Mills / Plug Mill w/ 2-3/8" reg Pin |
| 4 3/4" Fin Stabilized Bull Nose Mill w/ 2 3/8 REG Pin |
| 4-3/4 OD Bull Nose Mill x 2-1/4 ID c/w 3-1/2 IF Box - 24inch Long |
| 4.765" OD Mill - Concave Bladed Junk Mill, w/ 2 3/8" REG Pin |
| 4-7/8" Concave Mill - 2 7/8" Reg Pin Up |
| 5.220" Tapered Mill, 2-3/8" REG Pin |
| 5 1/2" Bladed Junk Mill, 3 1/2" Reg Pin Up |
| 5-1/2" Flat Bottom Junk Mill Junk Mill w/ 3-1/2" Reg Pin up - Blade OD 5-7/16" |
| 5-9/16" OD String Mill w/ 3-1/2" IF pin x box |
| 5-9/16" OD Tapered Mill w/ 3-1/2" Reg pin up |
| 5-3/4" Concave Mill w/ 3 1/2" Reg Pin Up |
| 5-3/4" OD String Mill w/ 3-1/2" IF Pin x Box |
| 5-3/4" OD Tapered Mill w/ 3-1/2" Reg pin up |
| 5-7/8" OD Mill - Bladed Junk Mill, w/ 3 1/2" REG Pin |
| 5.960" OD Mill - Tapered Mill, w/ 3 1/2" REG Pin |
| 6" OD Flat bottom/Slight concave mill c/w 3-1/2"REG Pin 18"Fish Neck |
| 6" OD String Mill x 2-1/4" ID, Integral bladed w/ 3-1/2" IF Pin x Box |
| 6 1/8" Ported Bladed Junk Mill w/ 3 1/2" Reg Pin |
| 6-1/16" OD 5 Bladed Junk Mill w/ 3 1/2" Reg Pin |
| 6-1/8" Bullnose/Tapered Mill for section mill, 3-1/2" IF Box |
| 6-1/8" Smooth OD Flat Bottom / Slight Concave mill w/ 3-1/2" REG Pin |
| 6.151" OD, 5 Bladed Junk Mill w/ 3-1/2 REG Pin Up |
| 6.151" Smooth OD Flat Bottom / Slight Concave mill w/ 3-1/2" REG Pin |
| 6.151" OD Reamer Mill, 3 1/2 IF (NC38) Box. |
| 6.151" OD Watermelon Mill, 3 1/2 IF (NC38) Pin x 3 1/2 IF (NC38) Box. |
| 6.241" Packer Milling Pilot Mill |
| 7.000" OD Mill - Concave Bladed Junk Mill, w/ 2 7/8" REG Pin |
| 8 1/4" Flat Bottom Junk Mill, 4 1/2" Reg Pin |
| 8.437" OD Mill - Tapered Mill, w/ 4-1/2" Reg Pin |
| 8 1/2" Integral Bladed Taper Mill, 4 1/2" Reg Pin |
| 8 1/2" Flat Bottom Junk Mill, 4 1/2" Reg Pin |
| 8-1/2" OD Integral Blade String Mill x 2-1/4" ID w/ 4-1/2" IF Pin x Box |
| 12 1/4" Flat Bottom Junk Mill, 4 1/2" Reg Pin |
| 5-1/2" OD Halford Section Mill w/ 3-1/2" Reg Pin Upper Connection, to suit 6-5/8" 17-24# & 7" 17-38# Casing, 6-1/8" Bullnose, 20mm Nozzle, 7-15/16" Knife Swing |
| 5-1/2" Section Mill Knives (Size) |
Junk
| Junk |
|---|
| 4" Magnet, 2 3/8" Reg Pin |
| 5 ½” Magnet , 3 1/2" Reg Pin |
| 7" Magnet with Flush Guide, 4 1/2" Reg Pin |
| 8 1/2" String Magnet, 4-1/2" Reg Pin |
| 11 1/2" Magnet with Flush Guide, 4 1/2" Reg Pin |
| 36" Long Heavy Duty Ditch Magnet |
| 4-1/2” Reverse Circulating Junk Basket , 2 7/8" Reg Box Up |
| 5 ¾” Reverse Circulating Junk Basket , 3 1/2"Reg Box Up |
| 7 7/8” Reverse Circulating Junk Basket with 4 1/2"IF Box |
| 4" Boot Basket |
| 4 3/4" Boot Basket |
| 6 3/4" Boot Basket |
| 7" Boot Basket |
| 9 5/8" Boot Basket |
| 4 3/4 Junk Sub |
| 6 1/2 Junk Sub |
| 9 5/8" Junk Sub 6-5/8" Reg Pin Up x 6-5/8" Reg Box Down |
Cutters
| Cutters |
|---|
| 2-7/8" OD Internal Hydraulic, Flo-Activated Tubing Cutter, 2-3/8" PAC Pin |
| 2-7/8" Cutter Hydraulic Knife Set , Limar Cutter Blade Diamter Settings 5-1/2" - 7" |
| 3-5/8" OD Internal Hydraulic, Pressure Pipe Cutter w/ 2-3/8" Reg Box x box |
| 3-5/8" Cutter Hydraulic Knife Set, Logan 4-1/2" - 6" |
| 5-9/16" OD Internal Hydraulic, Pressure Pipe Cutters w/ 3-1/2" IF Box Top x 3-1/2" REG box |
| 5-9/16" Cutter Hydraulic Knife Set, Logan 6-5/8" - 9-5/8" |
| Mechanical Internal Cutter: 1 13/16" OD, w/ ***** Box. To cut 2 3/8" Tubing |
Block
| Block |
|---|
| 2.347" Lead Impression Block, 2.347" OD x 1.25" thick lead on face w/ 1" sucker rod box |
| 6 1/16" Lead Impression Block with 3-1/2"REG pin w/ 16" Fishneck |
| 8 1/4" Lead Impression Block with 4 1/2" Reg Pin Up |
| 12" Lead Impression Block with 4 1/2" Reg Pin Up |
Wireline
| Wireline |
|---|
| 4-1/2" Wireline / Cable Retrieval Screw Grab Tool w / 2-3/8" IF Box Connection |
| 5-1/2” Wireline / Cable Retrieval Screw Grab Tool w/ 3-1/2” IF Box Connection |
Underreamer
| Underreamer |
|---|
| 3-7/8" OD Drill & Ream Under Reamer / Cutter Assembly "Long Neck" w/ 2 3/8" Reg Pin x 2 3/8" Reg Box |
| 3-7/8" x 8-3/4" PDC Under Ream Blades |
| 3-7/8" x 8-3/4" Carbide/PCBN cut/mill blades |
| 5-1/2" Under Reamer "Long Neck" Assembly w/ 3-1/2 Reg Pin x Box |
| 5-1/2" Under Reamer Knives |
| 5-1/2" x 14" PDC blades set of 3 |
| 5-1/2" x 10" PDC blades set of 3 |
| 5-1/2" x made to order set of 3 |
| 7-1/2" OD Drill & Ream Under Reamer / Cutter Assembly "Long Neck" w/ 4 1/2" Reg Pin x 4 1/2" Reg Box |
| 7-1/2" x 11-1/4" PDC Under Ream Blades |
| 7-1/2" x 11-1/4" Carbide/PCBN cut/mill blades |
Casing Scrapers
| Casing Scrapers |
|---|
| 4-1/2" Casing Scraper 2-3/8" Reg Connections, Pin Up x Box Down 4 1/2" Casing 9.5lbs-11.6lbs |
| 5" Casing Scraper, 2 3/8" Reg conn, 5" Casing 11.5lbs-18lbs Return point for used tool is Hofco Molendinar |
| 5-1/2" Casing Scraper 2-7/8" Reg Connections, Pin Up x Box Down 5 1/2" Casing 13lbs- 23lbs |
| 7" Casing Scraper, 3 1/2 REG Pin x 3 1/2 reg box (run pin up) 7" Casing 17 - 35 LBS |
| 9 5/8" Casing Scraper, 4.1/2"Reg Connections Pin x Box (run pin up) 9.5/8" Casing 29.3lbs-61lbs |
| 13-3/8" Casing Scraper, Body 10.75" OD, w/ 6-7/8" Reg pin x bob conns, F/ 13-3/8" 48-72PPF csg and 13-7/8" 88.2 PPF csg |
Misc Tools
| Misc Tools |
|---|
| 2-7/8" OD Flo-Activated Tubing Anchor |
| 24" Long Taper Tap w/ 2-7/8"IF box / Wicker 7/8" x 2.1/2" / Nominal catch 1.1/2 - max 2.1/4", min 1" |
| 3-1/8 OD x 48" Riz Tool Long Extensions Bars |
| 4 1/2" 9.5 - 13.5# Collar Locator w/ 2-3/8" Reg Pin x Box |
| 5-3/4" OD Riz Tool w/ removable clutch assembly to 2-3/8" reg pin x 5-3/4" TSWP 18" Box and pin |
